How to clean the hydraulic cylinder

Release time:

2021-05-12 19:33

For the hydraulic system, the hydraulic cylinder is like the heart, the bottom flange engineering hydraulic cylinder if the heart is difficult to repair, so the maintenance of its need to be careful. First in the maintenance period to pay attention to do a good job of rust. This is because the piston part in the working state is to extend the cylinder, will naturally be oxide, acid gas erosion, which requires us to coat it with appropriate grease protection, lest as a bearing part of the piston erosion and may break in the work.

In the process of use also need to do a good job of its maintenance and cleaning. At the same time, pay attention to the selection of suitable hydraulic oil and oil seal, hydraulic cylinder of different hydraulic oil choose different materials of oil seal, to ensure the life of the hydraulic cylinder. The heavier the load, the greater the pressure that the cylinder has to bear. So the maintenance of the oil cylinder is an important part of the maintenance of the entire hydraulic system.

First of all, a very important aspect is the need for regular cleaning to ensure its cleanliness. For example, when we regularly clean the power unit of the hydraulic cylinder, what should we pay attention to during the cleaning? First, we can heat the cleaning oil to the proper temperature, which can effectively remove the residue from the equipment.

Of course, after the cleaning work is completed, there are some follow-up work to deal with, which is an important means to ensure the performance of the hydraulic cylinder. The important thing is to prevent corrosion and other undesirable problems, we should continue to operate the equipment for a while, until the temperature returns to normal, and pay attention to the oil used in cleaning should be eliminated.

We can also use other methods to clean, to ensure the effectiveness of cleaning. Farm hydraulic cylinders, for example, can be used about every 10 minutes if the system in which the cylinder is located is operated intermittently. In addition, it can also be installed when the machine is shut down, so as to achieve more ideal results.

Related news

The usefulness of the piston rod

The piston rod is a connecting part that supports the piston to do work, most of which are used in cylinders and cylinder motion actuators, and is a moving part with frequent movement and high technical requirements.

Basic principle of hydraulic pump

It is a hydraulic element that provides pressurized liquid for hydraulic transmission and is a kind of pump. Its function is to convert the mechanical energy of power machines (such as electric motors and internal combustion engines) into liquid pressure energy.

Improved a new type of swing hydraulic cylinder

In recent years, our company has increased our own technological transformation. Our company recently modified an old type to a new type of swing hydraulic cylinder.