Products

Aerial working vehicle cylinder

图片名称

The appearance and installation size of this series of hydraulic cylinders are in line with ISO6020 international standard except the installation type of axial base

Specifications and models can be customized according to customer requirements or consultation

Contact person: Manager Zhou

Tel: +86-510-85596218
Email: info@wxsbjx.com

Cylinder introduction

Swing cylinder

Swing cylinder

Function: realize platform and crank arm swing
Specification: Torque 500～5000N.m
Swing angle 0～360°
Pressure: 21MPa (standard working pressure)
Luffing cylinder

Luffing cylinder

Function: Realize the up and down pitching rotation of the boom, which is the main power of the aerial work vehicle
Specification: Bore diameter 50mm～350mm
Rod diameter 30mm～300mm
Stroke ≤3000 mm
Pressure: 30MPa (maximum working pressure)
Telescopic cylinder

Telescopic cylinder

Function: Realize the linear telescopic movement of the boom
Specification: cylinder diameter 45mm～200mm
Rod diameter 32mm～180mm
Stroke ≤15000mm
Pressure: 30MPa (maximum working pressure)
Outrigger cylinder

Outrigger cylinder

Function: Support the weight of the entire equipment when the aerial work truck is working
Specification: cylinder diameter 45mm～200mm
Rod diameter 30mm～180mm
Stroke ≤2000mm
Pressure: 30MPa (maximum working pressure)
Leveling cylinder

Leveling cylinder

Function: Adjust the angle of the aerial work platform
Specification: Bore diameter 85mm～180mm
Rod diameter 50mm～100mm
Stroke ≤300mm
Pressure: 30MPa (maximum working pressure)
Steering cylinder

Steering cylinder

Function: Steering system for the chassis tires of aerial work vehicles
Specifications: Bore diameter 63mm～200mm
Rod diameter 36mm～140mm
Stroke ≤1000mm
Pressure: 30MPa (maximum working pressure)

Product advantages

• The compact structure design and the use of high-strength materials ensure the extremely light weight of the cylinder

• The design has a wide range of temperature resistance (-40℃～+100℃), and can provide higher or lower temperature cylinder customization services

• The theoretical analysis and finite element calculation of the system ensure that the oil cylinder has a very high service life under heavy load

• Mature sealing system to ensure that the cylinder has no jitter or crawling problems at low speeds

• Provide a variety of surface anti-corrosion treatment solutions: Ni/Cr electroplating, ceramic spraying, laser cladding, QPQ, etc.

• The guide sleeve adopts a special anti-corrosion process to ensure that the cylinder will work at a long time without rusting the guide sleeve

• It can be designed and integrated according to requirements, including hydraulic locks, load holding valves, sequence valves, relief valves, pressure measuring joints, etc.

• Working pressure, size specifications, installation methods, etc. can be customized according to customer needs